Quick answer
Hang felt pumpkin bunting indoors by choosing a focal point, testing a removable fixing, and arranging the pumpkins so they face outward. Keep the bunting away from heat sources and direct sunlight to protect the felt.
Choose a spot that suits felt bunting
Felt bunting softens a room rather than dominating it, so it works best where people already gather: a mantel, a shelf edge, or a doorway. Avoid placing it above a radiator, fireplace, or in a sunny window, as prolonged heat or direct light can cause the felt to fade or distort. For a cohesive look, repeat the pumpkin motif in other decorations, such as a matching garland or a small bowl of real pumpkins.
Match the fixing to your wall
The bunting is lightweight, so you don't need heavy-duty hardware. On painted walls, removable adhesive hooks are the safest choice because they come away without marks. For wood or brick, small nail hooks or picture hooks work well. If you're renting or unsure, use damage-free strips and test one hook with a small weight before hanging the full length.
Step-by-step hanging guide
- Pick your location and measure: Hold the bunting up against your chosen spot to check the drop and span. Mark where each end will sit with a pencil dot. Common mistake: guessing the length and ending up with a sagging or too-tight line. Check that the bunting clears furniture and walkways before fixing anything.
- Prepare your fixings: Clean the wall with a dry cloth, then apply removable hooks or nails at your marked points. Let adhesive hooks set for the time stated on the pack. Common mistake: sticking hooks to dusty or freshly painted walls, which weakens the hold. Test one hook with a light tug before hanging the bunting.
- Attach the bunting: Loop each end of the bunting over its hook or tie it loosely. Adjust the tension so the pumpkins hang naturally without stretching the felt. Common mistake: pulling too tight, which can distort the shapes. Leave a little slack so the bunting can move slightly without stressing the fixings.
- Arrange the pumpkins: Fan out the felt pumpkins so they face forward and are evenly spaced. If the bunting is doubled, separate the layers to avoid bunching. Common mistake: letting pumpkins twist or overlap, which hides the design. Step back to check the arrangement from the main viewing angle.
- Secure loose ends: If the bunting is in a high-traffic area, use a small piece of clear tape or a pin to hold the ends in place. Common mistake: leaving long tails that can be pulled or caught. Trim any excess cord only if the design allows; otherwise tuck it behind.
Product facts
- Felt Pumpkin Halloween Bunting- 5 Inner Pack: This bunting has 9 felt pumpkins and is handmade using traditional needle felt techniques in Nepal. The nine pumpkins give you enough length to drape across a mantel or shelf, while the handmade felt adds a soft, crafted texture that suits indoor settings.

Felt Pumpkin Halloween Bunting- 5 Inner Pack


